Nicety Mould Co., Ltd.

  Our  blow molding capabilities  extend to small and large parts using single or multi-part molds, including both air needle and blow pin models. The exact techniques used for a given project depend largely on the complexity and desired physical characteristics required by the design. The material selection process can be similarly complicated and often requires professional guidance for optimal results. Many of the same materials used in blow molding are also good choices for  injection molding , including ABS, HDPE, PS, PU, Santoprene, PP, and LDPE. There are a range of additional materials that are more uniquely suited for the solid products produced with injection molding, such as: Material used in injection moulding Acrylic Acetal Delrin (Polyoxymethylene) Fortron Polyphenylene Sulfide (PPS) Nylon 6/6 Polyetheretherketone (PEEK) Poly Vinyl Chloride (PVC) Polycarbonate (PC) Polyester Ultem Urethane Valox Resin / Polybutylene Terephthalate (PBT) Why Molding M...

  Blow molding can be found around you and you don’t even know it. That soda that your drinking has a plastic bottle, which was blow-molded. This process can be used to manufacture plastic products. The process involves heating a plastic tube (known as a preform or parison) to its melting point and then putting that into the cavity of a mold.They then use compressed air to inflate the molten plastic like a balloon so that it takes the shape of the mold but is hollow inside. The amount of plastic used and the air pressure determines how thick the final product is. Bottle cap moulding Supplier is characterized by high speed rotary compression moulding unit, ensure that each compression molding mould module has independent running unit, which greatly improves the flexibility of production, reduce the mold production cost, prolong the service life. The compression moulding mold is the foundation of plastic bottle cap processing, and the following technologies must be done to realize...